H-55
Semi-Automatic High Profile Turntable

The Orion H-55 is 1,800 pounds worth of rugged machine built for dependable service in even the harshest industrial environments. With a load weight capacity of 6,000 pounds and a maximum turntable speed of 16 RPM, the H-55 is more than capable of wrapping up to 40 loads or more per hour.

Insta-Thread™ film delivery system

Orion's Insta-Thread is a powered prestretch film delivery system which elongates stretch film between two closely spaced, specially textured powered rollers prior. The standard prestretch rate is 260%, however higher or lower rates (up to 400%) are available for specific applications. Pre-stretching film not only reduces your film cost per load, it substantially increases the strength and holding power of the stretch film. Film loading on the Insta-Thread is fast, safe and easy: simply open the hinged roller frame, pull the film across then close and latch the frame.

User friendly control panel

The L-55 uses a MicroLogix PLC controller, and industry standard for reliability and flexibility. The control panel uses non-proprietary industrial grade 22mm switches and buttons are used on the control panel for durability and easy replacement. Controls are clear, easy to read and user-friendly. The box is NEMA 12 rated.

State of the art allen bradley PLC

The H-66 uses the industry standard Allen Bradley 1000 Series PLC for maximum reliability and flexibility. The PLC has a high speed counter which is used by the Revo-Logic system for accurate application of top and bottom wraps, thus saving film on every load you wrap.

Forklift portable from front or rear

Conveniently located fork tubes at the front and rear of the machine. Front tubes are especially useful when machine is placed against a wall. Major components such as motors and gearboxes are mounted for easy access saving time and money if maintenance is required.

Heavy duty turntable support system

Four solid steel casters support loads weighing up to 6,000 pounds. The turntable is driven by a chain and sprocket for a very positive mechanical coupling. Unlike some machines that use belts, the heavy duty ANSI roller chain is commonly available and is non-proprietary. Positive home alignment assures that the turntable always stops in the same position as where is started.